GMC C5500 SHOP SERVICE TRUCK-MACHINIST TOOLS & MORE !!
GMC C5500 SHOP SERVICE TRUCK-MACHINIST TOOLS & MORE !!
Pennington Auctions LLC | KITTANNING, PA 16201
Date(s) :  9/25/2024 - 10/9/2024
Buyer Premium :  BUYERS PREMIUM APPLIES TO ALL PURCHASES


Online Only Auction
BIDDING OPEN NOW THRU OCTOBER 8TH, 2024 WITH FIRST LOT CLOSING AT 8PM EST.
2007 CHEVROLET C5500 SERVICE TRUCK WITH 140041 MILES. INSPECTED TO FEBRUARY OF 2025. 6.6 LITRE DIESEL ENGINE WITH AN ALLISON AUTOMATIC TRANSMISSION. NEW BRAKE LINES, FUEL LINES, AND SENDING UNITS. MILLER BOBCAT 250 NT CC/CV-AC/DC WELDER AND10,000 WATT GENERATOR. HYDRAULIC DRIVE AIR COMPRESSOR. 5500 LB REMOTE CONTROL CRANE THAT IS FULLY SERVICED LESS THAN A YEAR AGO AND READY TO BE CERTIFIED. VEHICLE STARTS, RUNS, MOVES, AND IS SERVICED UP TO DATE.. CONTENTS-EMGLO ELEC AIR COMPRESSOR & RESERVE AIR TANK, MACHINE SHOP ITEMS INCLUDE-OLDER LEBLOND LATHE, OLDER MONARCH LATHE, VAN NORMAN GRINDER, CHICAGO RIVETRIVETER, BURR KING MODEL 760 SANDER, PROD. SANDER, MICROFLAT BLACK GRANITE SURFACE PLATE TABLE, RANGE DIAL HEIGHT GAUGE, HUNDREDS OF MORSE TAPER DRILL BITS & REGULAR BITS, LG ASST OF METRIC & STANDARD TAPS, MACHINISTS VISES, COUNTERSINK BITS, MORSE TAPER COLLETS, SEVERAL MEGA-WRENCHES, SPANNER WRENCHES, AND MORE....
185 ALL ITEMS SOLD AS-IS
186 PLEASE READ THE TERMS & CONDITIONS
BY REGISTERING FOR THIS AUCTION YOU AGREE TO ALL TERMS AND CONDITIONS AS STATED. **THERE ARE NO BID RETRACTIONS. ONCE A BID IS PLACED THE BIDDER IS RESPONSIBLE FOR THAT BID AND RESULT. ALL ITEMS ARE SOLD *AS-IS* AND THE ITEM BEING SOLD HAS NOT BEEN MODIFIED, ALTERED, INSPECTED, OR OPERATED BY THE AUCTIONEER OR AUCTION STAFF. NO REFUNDS OR EXCHANGES OR CHARGEBACKS. PAYMENT DUE UPON ITEM PICK-UP. ALL ITEMS HAVE A 10% (TEN PERCENT) BUYERS PREMIUM. THE BUYERS PREMIUM APPLIES TO ALL SALES IN THIS AUCTION. PAYMENT BY CASH, PA CHECK ONLY, VISA, MASTERCARD, DISCOVER-SAME AS CASH. PAYMENT DUE AT ITEM PICK-UP. ALL ITEMS BID ON AND NOT PICKED UP WILL BE CHARGED TO THE HIGH BIDDERS CREDIT CARD AT THE CLOSE OF PICK-UP AND FORFEITED. PLEASE DO NOT BID IF UNABLE TO MAKE THE SCHEDULED PICK-UP DATE AND TIME. PLEASE BRING HELP AND PACKAGING AS NEEDED.
187 ALL ITEMS HAVE A 10% BUYERS PREMIUM
ALL ITEMS HAVE A 10% (TEN PERCENT) BUYERS PREMIUM. THE BUYERS PREMIUM APPLIES TO ALL SALES IN THIS AUCTION.
188 PAYMENT INFORMATION
ALL ITEMS HAVE A 10% (TEN PERCENT) BUYERS PREMIUM. THE BUYERS PREMIUM APPLIES TO ALL SALES IN THIS AUCTION. PAYMENT BY CASH, PA CHECK ONLY, VISA, MASTERCARD, DISCOVER-SAME AS CASH. ***PLEASE NOTE CREDIT CARD WILL NOT BE ACCEPTED FOR TRUCK PAYMENT**. PAYMENT DUE AT ITEM PICK-UP. ALL ITEMS BID ON AND NOT PICKED UP WILL BE CHARGED TO THE HIGH BIDDERS CREDIT CARD AT THE CLOSE OF PICK-UP AND FORFEITED. THERE ARE **NO BID RETRACTIONS**. PLEASE DO NOT BID IF UNABLE TO MAKE THE SCHEDULED PICK-UP DATE AND TIME. PURCHASER OF THE SERVICE TRUCK WILL BE RESPONSIBLE FOR PAYING ALL SALES TAX, REGISTRATION FEES, AND OTHER FEES RELATED TO VEHICLE TRANSFER.
189 PICKUP DATE & LOCATION
WINNING BIDDERS WILL RECEIVE EXACT LOCATION IN THE HEADER AREA OF THE INVOICE
190 PLEASE CONTACT AUCTIONEER TO ARRANGE PREVIEW
PHONE (724) 657-4413 OR jefferypenn@comcast.net
191 A FORKLIFT WILL BE ON PREMISES TO LOAD
192 2007 CHEVROLET C5500 SERVICE TRUCK
2007 CHEVROLET C5500 SERVICE TRUCK WITH 140041 MILES. INSPECTED TO FEBRUARY OF 2025. 6.6 LITRE DIESEL ENGINE WITH AN ALLISON AUTOMATIC TRANSMISSION. NEW BRAKE LINES, FUEL LINES, AND SENDING UNITS. MILLER BOBCAT 250 NT CC/CV-AC/DC WELDER AND10,000 WATT GENERATOR. HYDRAULIC DRIVE AIR COMPRESSOR. 5500 LB REMOTE CONTROL CRANE THAT IS FULLY SERVICED LESS THAN A YEAR AGO AND READY TO BE CERTIFIED. VEHICLE STARTS, RUNS, MOVES, AND IS SERVICED UP TO DATE. PLEASE NOT THAT THE CHECK ENGINE LITE IS ON WITH A GLOW PLUG CIRCUT DIAGNOSTIC CODE AND THE WINDSHIELD IS CRACKED. BUYER IS RESPONSIBLE FOR ALL FEES AND TAXES DUE AT TRANSFER OF REGISTRATION.
193 EMGLOW 3PH ELECT AIR COMPRESSOR W/EXTRA TANK
194 VAN NORMAN 1/2HP GRINDER W/SHIELD (110V)
195 CHICAGO RIVET & MACHINE CO LINING RIVETER
196 LEBLOND MACHINISTS LATHE W/BELLY PAN REAR SHIELD
& MORE
197 MONARCH LATHE
198 BURR KING MODEL 760 SANDER
199 PRODUCTION MACHINE CO SANDER
200 MICROFLAT BLACK GRANITE SURFACE PLATE TABLE
MEASURES 36" X 48" STAND INCLUDED.
201 (T & O TOOLS) #57-016-170 RANGE DIAL HEIGHT GAUGE
202 55" TALL PEDESTAL
203 REGAL M56x2.0 TAP - NEW
204 REGAL 2IN - 4HSG TAP - NEW
205 1 & 11/16 DRILL BIT - 17 IN LONG
206 REGAL M56X2.0 TAP
207 ASSORTMENT OF CUTTING TOOLS & TAPS
208 M36X4 BIT - NEW
209 M36X4 BIT - NEW
210 M36X4 BIT - NEW
211 M36X4 BIT - NEW
212 ASSORTED LOT OF METRIC TAPS
213 (3) CLEVELAND M24X3.0 HAND TAPS
214 (3) CLEVELAND M24X3.0 HAND TAPS
215 (3) REGAL M20X2.5 BITS
216 (3) REGAL M20X2.5 BITS
217 M36X4 BIT - NEW
218 M36X4 BIT - NEW
219 M36X4 BIT - NEW
220 SIMPLEX 3A SPREADER OR SCREW JACK
221 (2) REGAL M24X2 TAPS - NEW
222 (5) MEGA-WRENCH COLLET WRENCHES
MGR 25, MGR 42, MGR 60, MGR 70, MGR 80
223 (5) MEGA-WRENCH COLLET WRENCHES
MGR 14, MGR 35, MGR 42, MGR 46, MGR 60
224 (5) MEGA-WRENCH COLLET WRENCHES
MGR 20L, MGR 30, MGR 35, MGR 60, MGR 80
225 (2) NORTH AMERICAN 36X1.5 TAPS
226 (2) NORTH AMERICAN 36X1.5 TAPS
227 (3) BRAND NEW OSG M24X3 BITS
228 (3) BRAND NEW OSG M24X3 BITS
229 (2) NATC M20X2.5 TAPS - NEW
230 (2) NATC M20X2.5 TAPS - NEW
231 (3) NATC NEW M36X1.5 TAPS
232 (3) NEW OSG M20X2.5 TAPS
233 (2) WALTER M16 TAPS
234 (2) WIDELL PLUG TAPS M36X4X10
235 (2) WIDELL PLUG TAPS M36X4X10
236 AIRCO TORCH WRENCH
237 (6) NEW GREENFIELD M24X3.0 TAPS
238 (3) EMUGE M24X6 TAPS
239 (3) NEW OSG M24X3TAPS
240 (4) NEW NATC M20X2.5X6 TAPS
241 (3) NEW NATC M20X2.5X6 TAPS
242 NEW NATC 2.5X12 TAP
243 (4) NEW WIDIA M20X2.5 TAPS
244 (6) NEW NATC M16X2.0 TAPS
245 (7) NEW NATC M16X2.0 TAPS
246 NEW NATC M42X4.5 TAP
247 (3) NEW REGAL M16X2.0 TAPS
248 (3) NEW EMUGE M20 TAPS
249 (2) ASAHI 105-115 SPANNER WRENCHES
250 (2) ARMSTRONG 2-4 3/4 IN SPANNER WRENCHES
251 (2) ASAHI 105-115 SPANNER WRENCHES
252 (3) NEW NORTON BC3-7 SINGLE POINT DIAMOND TOOLS
253 (4) NEW NORTH AMERICAN M20X1.5 TAPS
254 (5) GUHRING M16X2 TAPS
255 (5) GUHRING M16X2 TAPS
256 REGAL M48X5.0 TAP
257 NATC 1 5/8 X 12 TAP
258 (13) VARIOUS MAKER M20X2.5 TAPS
259 (3) NEW GEORGE WHALLEY CO 11/16 FLUID BITS
260 (2) PRECISION 3/4 IN T-400 CORE DRILL 2MT SHANK
261 (2) WHALLEY OIL HOLE DRILL 5/8 3MT
262 (2) OSG M20X2.5 BITS
263 (8) NEW M24X3 TAPS
VARIOUS MAKERS
264 (5) REGAL M12X1.75 TAPS
265 (2) NATC 36X2 & 36X1.5 TAPS
266 (2) NEW REGAL M16X2 TAPS
267 (2) METCUT 2 3/16 COUNTERBORE BITS
268 WIBIA 2 1/2 STRAIGHT SHANK INDEXABLE COUNTERBORE
269 (2) M20X2 1/2 X 6 AND (2) M20X2.5X8 TAPS - NEW
270 LEXINGTON 2 IN CNC END MILL
271 METCUT H88 HEXDRIVE COUTER BORE (2 SETS)
272 (2) 2 1/8 IN CONTER BORE
273 PALMGREN 2 1/2 IN MACHINE VISE - WORKS
274 PALMGREN 2 1/2 IN VISE
275 HEINRICH CO 6 SV VISE, 6IN
275a PALMGREN MACHINIST VISE
275b CARDINAL 8" #8B SPEED VISE
275c L-W CHUCK 6" MACHINIST VISE
276 (2) NEW OSG M30X3.5 TAPS
277 (2) NEW OSG M20X2.5 BITS
278 (4) NATC M12X1.75 TAPS
279 (2) NEW, (1) USED WHALEY FLUID BITS - #3 TAPER
(2) 5/8 ARE NEW 7/8 IS USED
280 (2) NATC 1 1/4 X 7 & 1 1/4 X 12 TAPS (LH THREAD)
281 (2) YANKEE CO 15MM STRAIGHT FLUTE REAMERS
282 (7) M10X1.5 TAPS - DIFFERENT LENGTHS
283 (4) NATC M30X3.5 TAPS
284 (2) NATC M30X3.5 TAPS
285 2 1/8 IN COUNTERBORE
286 1 1/4 & 1 1/2 COUNTER SINK REAMERS
287 END MILL - NO SPECIFICATIONS
288 1 IN COUNTERSINK BIT
289 (2) EMUNGE M30 TAPS
290 (2) M16X2 M16X1.5 TAPS
291 (2) M25X1.5 TAPS
292 REGAL M33X1.5 TAP
293 (2) NATC 5/8 X 8 TAPS - RIGHT HAND
294 (2) M24X3 10 IN PLUG TAPS
295 GARR BALLNOSE END MILL - 3/4X6X3
296 (3) CORE DRILLS 9/16 21/32 11/16 FLUID (2NT-ALL)
297 BOX OF MISC DRILL BITS MT2&MT3
SIZES 2-21/32, 1, AND OTHERS
298 MISC TAPS AND 1 REAMER
TAPS - M30X3.5, M10X1.5, M12X1.75, M25X1.5, M16X2, REAMER - .7X880
299 1 1/4X5 TAP
300 MISC LOT OF TAPS & MORE
M8,M3,M4,M6, AND OTHERS!
301 HELI-COIL KIT?
302 3 STD TAPS 1 1/8X16, 1 3/16X18, 1 1/4X12
303 90 DEGREE STUB TAPER COUNTERSINK 1 1/2IN
304 (2) MACHINE HANDELS - 7/8 SQ, 3/4 SQ
305 MISC DRILL BITS & TAPERS
306 DOUBLE COUNTERSINK BITS
307 LOT OF MISC LARGER TAPS - SEE PHOTOS
308 LOT OF TAPS W/COLLETS
309 LOT OF MISC TAPS - SEE PHOTOS
310 LOT OF MISC TAPS - SEE PHOTOS
311 LOT OF MISC TAPS - SEE PHOTOS
312 (6) LATHE INSERT TOOLS
313 (6) LATHE INSERT TOOLS
314 (7) LATHE INSERT TOOLS
315 (11) LATHE INSERT TOOLS
316 PR OF ASAHI SPANNER WRENCHES 105-115
317 PR OF ASAHI SPANNER WRENCHES 105-115
318 LOT OF MISC TAPS - SEE PHOTOS
319 LOT OF LEVELERS
320 LOT OF MISC TAPS - SEE PHOTOS
321 LOT OF DRILL BUSHINGS
322 LOT OF SMALLER BUSHINGS
323 LOT OF MISC TAPS W/COLLETS
324 LOT OF MISC TAPS W/COLLETS
325 LOT OF MISC TAPS W/COLLETS
326 LOT OF LARGER MORSE TAPER COLLETS
327 LOT OF SMALLER MORSE TAPER COLLETS
328 LOT OF LARGE MORSE TAPER COLLETS
329 MEDIUM SIZE MORSE TAPER COLLETS & OTHERS
330 ASSORTMENT OF MORSE TAPER COLLETS
331 ASSORTMENT OF MORSE TAPER COLLETS
332 ASST OF SMALLER MORSE TAPER COLLETS
333 ASST OF SMALLER MORSE TAPER COLLETS
334 ASST OF SMALLER MORSE TAPER COLLETS
335 ASST OF SMALLER MORSE TAPER COLLETS
336 ASST OF SMALLER MORSE TAPER COLLETS
337 ASST OF SMALLER MORSE TAPER COLLETS
338 ASST OF MEDIUM & LARGER MORSE TAPER COLLETS
339 ASST OF MEDIUM & LARGER MORSE TAPER COLLETS
340 ASSORTMENT OF MORSE TAPER COLLETS
341 ASSORTMENT OF MORSE TAPER COLLETS
342 ASST VARIOUS SIZE COUNTERSINK BITS
343 LARGER SIZE MORSE TAPER COLLETS
344 VARIOUS SIZE LOT OF TAP EXTRACTORS
345 LOT OF ABRASIVES
346 LOT OF THREAD INSERTS - (3/4 X 16)
347 LOT OF THREAD INSERTS - (3/4 X 10)
348 LOT OF VARIOUS SIZE THREAD INSERTS
349 ASST OF SPANNER WRENCHES
350 ASST OF TOOLING WRENCHES
351 ASST OF TOOLING WRENCHES
352 LOT OF SINGLE OPEN END WRENCHES
353 ASST OF MEDIUM SIZE MORSE TAPER COLLETS
354 LOT OF MORSE TAPER COLLETS
355 LOT OF MORSE TAPER COLLETS
356 ASST OF MORSE TAPER COLLETS
357 (8) LATHE TURNING TOOLS
358 (8) LATHE TURNING TOOLS
359 LOT OF MORSE TAPER COLLETS
360 LOT OF MORSE TAPER COLLETS
361 LOT OF (5) DIES
362 LOT OF DRILL BUSHINGS
363 (4) TAPS
364 LOT OF MORSE TAPER DRILL BITS
365 LOT OF (3) TAPS
366 MISC LOT OF NON TAPER DRILL BITS
367 MISC LOT OF NON TAPER DRILL BITS
368 MISC LOT OF NON TAPER DRILL BITS
369 MISC LOT OF NON TAPER DRILL BITS
370 MISC LOT OF NON TAPER DRILL BITS
371 MISC LOT OF NON TAPER DRILL BITS
372 MISC LOT OF NON TAPER DRILL BITS
373 LOT OF MORSE TAPER FLUID BITS
374 LOT OF LONGER NON TAPER DRILL BITS
375 LOT OF MORSE TAPER DRILL BITS
376 LOT OF MORSE TAPER DRILL BITS
377 LOT OF MORSE TAPER DRILL BITS
378 LOT OF MORSE TAPER DRILL BITS
379 LOT OF MORSE TAPER DRILL BITS
380 LOT OF MORSE TAPER DRILL BITS
381 LOT OF MORSE TAPER DRILL BITS
382 LOT OF MORSE TAPER DRILL BITS
383 LOT OF MORSE TAPER DRILL BITS
384 LOT OF MORSE TAPER DRILL BITS
385 LOT OF MORSE TAPER DRILL BITS
386 LOT OF MORSE TAPER DRILL BITS
387 LOT OF MORSE TAPER DRILL BITS
388 LOT OF MORSE TAPER DRILL BITS
389 LOT OF MORSE TAPER DRILL BITS
390 LOT OF MORSE TAPER DRILL BITS
391 LOT OF MORSE TAPER DRILL BITS
392 LOT OF MOSTLY SMALLER MORSE TAPER BITS
393 LOT OF MORSE TAPER BITS
394 LOT OF MORSE TAPER BITS
395 LOT OF REAMERS
396 LOT OF REAMERS
397 LOT OF REAMERS
398 LOT OF REAMERS
399 LOT OF REAMERS
400 LOT OF REAMERS
401 LOT OF REAMERS
402 LOT OF REAMERS
403 LOT OF REAMERS
404 LOT OF REAMERS
405 LOT OF REAMERS
406 LOT OF REAMERS
407 LOT OF REAMERS
408 LOT OF REAMERS
409 LOT OF REAMERS
410 LOT OF LARGE MORSE TAPER BITS
411 LOT OF MORSE TAPER DRILL BITS
412 LOT OF SMALLER MORSE TAPER DRILL BITS
413 (2) DRILL BITS
414 LOT OF REAMERS
415 LOT OF REAMERS
416 LOT OF REAMERS
417 LOT OF MORSE TAPER DRILL BITS
418 LOT OF MORSE TAPER DRILL BITS
419 LOT OF MORSE TAPER DRILL BITS
420 LOT OF MORSE TAPER DRILL BITS
421 LOT OF MORSE TAPER DRILL BITS
422 LOT OF MORSE TAPER DRILL BITS
423 LOT OF MORSE TAPER DRILL BITS
424 LOT OF MORSE TAPER DRILL BITS
425 LOT OF MORSE TAPER DRILL BITS
426 LOT OF MORSE TAPER DRILL BITS
427 LOT OF MORSE TAPER DRILL BITS
428 LOT OF MORSE TAPER DRILL BITS
429 LOT OF MORSE TAPER DRILL BITS
430 LOT OF MORSE TAPER DRILL BITS
431 LOT OF MORSE TAPER DRILL BITS
432 LOT OF MORSE TAPER DRILL BITS
433 LOT OF MORSE TAPER DRILL BITS
434 LOT OF MORSE TAPER DRILL BITS
435 LOT OF MORSE TAPER DRILL BITS
436 LOT OF MORSE TAPER DRILL BITS
437 LOT OF MORSE TAPER DRILL BITS
438 LOT OF MORSE TAPER DRILL BITS
439 MISC TAPS W/COLLETS
440 ASST OF MISC TAPS W/COLLETS
441 ASST OF MISC TAPS W/COLLETS
442 ASST OF TAPS
443 LOT OF MORSE TAPER DRILL BITS
444 ASST OF TAPS
445 ASST OF TAPS
446 ASST OF TAPS W/COLLETS
447 ASST OF TAPS W/COLLETS
448 MORSE TAPER COLLET SLEEVES
449 LOT OF MORSE TAPER DRILL BITS
450 LOT OF MORSE TAPER DRILL BITS
451 LOT OF MORSE TAPER DRILL BITS
452 LOT OF MORSE TAPER DRILL BITS
453 LOT OF MORSE TAPER DRILL BITS
454 LOT OF MORSE TAPER DRILL BITS
455 LOT OF MORSE TAPER DRILL BITS
456 LOT OF MORSE TAPER DRILL BITS
457 ASST OF MISC TAPS
458 LOT OF MORSE TAPER DRILL BITS
459 ASST OF TAPS
460 ASST OF TAPS
461 ASST OF TAPS
462 ASST OF SMALLER MORSE TAPER DRILL BITS
463 ASST OF TAPS
464 LOT OF (3) NIB MEGA WRENCHES (SEE DESCRIPTION)
SIZES ARE: MGR60, MGR42L, MGR30L
465 (6) USED MEGA WRENCHES (SEE DESCRIPTION)
SIZES ARE: MGR80L, MGR70, MGR60, MGR50L, MGR42L, MGR30L
466 ASST OF THREADED STEEL RODS
467 LOT OF MORSE TAPER DRILL BITS
468 LOT OF MORSE TAPER DRILL BITS
469 LOT OF MORSE TAPER DRILL BITS
470 LOT OF LARGE TAPS
471 LOT OF MORSE TAPER DRILL BITS
472 LOT OF MORSE TAPER DRILL BITS
473 LOT OF MORSE TAPER DRILL BITS
474 LOT OF MORSE TAPER DRILL BITS
475 LOT OF MORSE TAPER DRILL BITS
476 LOT OF MORSE TAPER DRILL BITS
477 LOT OF MORSE TAPER DRILL BITS
478 LOT OF MORSE TAPER DRILL BITS
479 LOT OF MORSE TAPER DRILL BITS
480 LOT OF MORSE TAPER DRILL BITS
481 LOT OF MORSE TAPER DRILL BITS
482 LOT OF MORSE TAPER DRILL BITS
483 LOT OF MORSE TAPER DRILL BITS
484 LOT OF MORSE TAPER DRILL BITS
485 LOT OF MORSE TAPER DRILL BITS
486 LOT OF MORSE TAPER DRILL BITS
487 LOT OF MORSE TAPER DRILL BITS
488 LOT OF MORSE TAPER DRILL BITS
489 LOT OF MORSE TAPER DRILL BITS
490 THANK YOU FOR VIEWING OUR AUCTION
491 LOT OF LARGE TAPS
492 LOT OF LARGE TAPS
493 ASST OF TAPS
494 ASST OF COUNTER BORE TOOLS & OTHERS
495 ASST OF COUNTER BORE TOOLS & OTHERS
496 ASST OF MORSE TAPER DRILL BITS
497 ASST OF LARGER TAPS
498 ASST OF LARGER TAPS
499 SINGLE END 2-1/4" WRENCH
500 LOT OF MACHINE TOOL WRENCHES
501 ASST OF WRENCHES & MORE
502 MORSE TAPER DRIFT PUNCHES
503 MORSE TAPER DRIFT PUNCHES
504 MORSE TAPER DRIFT PUNCHES
505 (11) LATHE INSERT TOOLS
506 (8) LATHE INSERT TOOLS
507 (11) LATHE INSERT TOOLS
508 MORSE TAPER DRIFT PUNCHES
509 PR OF HEAVY DUTY CLAMPS
510 LOT OF MISC TAPS & COLLETS
511 (3) SPANNER WRENCHES
512 (3) ER40 SPANNER WRENCHES
513 (3) ER40 SPANNER WRENCHES
514 (3) ER32 SPANNER WRENCHES
515 ER32, ER25 & OTHER WRENCH
516 (4) ADJUSTABLE SPANNER WRENCHES
517 (4) ADJUSTABLE SPANNER WRENCHES
518 (3) ADJUSTABLE SPANNER WRENCHES
519 LOT OF QUICK TWIST LOCKING KEYS
520 LOT OF (4) SPANNER WRENCHES
521 ASST OF 3/4" NUTS, BOLTS & MORE
522 LOT OF (4) MEGA WRENCHES
MGR99, MGR80L, MGR70, MGR30L
523 LOT OF (3) MEGA WRENCHES
MGR80L, MGR50L, MGR30L
524 LOT OF (3) MEGA WRENCHES
MGR80L, MGR42L, MGR30L
525 (1) NEW MGR30L MEGA WRENCH
526 LOT OF MISC MACHINISTS PARTS-PIECES TOOLS